Thermal Properties Research Articles

Pluronic P123/DMSO Lyotropic Liquid Crystal for Incorporating Bioactive Substances for Topical Application.

Lyotropic liquid crystals (LLCs) have attracted considerably growing interest in drug delivery applications over the last years. The structure of LLC matrices is complementary to cell membranes and provides an efficient, controlled, and selective release of drugs. In this work, a complex of experimental methods was used to characterize binary LLCs Pluronic P123/DMSO and triple LLC systems Pluronic P123/DMSO/Ibuprofen, which are interesting as transdermal drug delivery systems. Liquid crystalline, thermal, and rheological properties of LLCs were studied. Concentration and temperature areas of the lyomesophase existence were found, and phase transition enthalpies were evaluated. Intermolecular interactions among the components were studied by infrared (IR) spectroscopy. In vitro studies of Ibuprofen (Ibu) release from various LLCs allow differentiation of its release depending on the polymer content. Atomic force microscopy and contact angle methods were used to characterize the surface morphology of the hydrophobic membrane, which was used as a stratum corneum model, and also evaluate the adhesion work of the LLCs. A complex analysis of the results provided by these experimental methods allowed revealing correlations between the phase behavior and rheological characteristics of the LLCs and release kinetics of ibuprofen. The proposed biocompatible systems have considerable potential for a transdermal delivery of bioactive substances.

"Dissolve-on-Demand" 3D Printed Materials: Polymerizable Eutectics for Generating High Modulus, Thermoresponsive and Photoswitchable Eutectogels.

Solvent-free photopolymerization of vinyl monomers to produce high modulus materials with applications in 3D printing and photoswitchable materials is demonstrated. Polymerizable eutectic (PE) mixtures are prepared by simply heating and stirring various molar ratios of N-isopropylacrylamide (NIPAM), acrylamide (AAm) and 2-hydroxyethyl methacrylate (HEMA). The structural and thermal properties of the resulting mixtures are evaluated by 1D and 2D NMR spectroscopy as well as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). UV photocuring kinetics of the PE mixtures are evaluated via in situ photo-DSC and photorheology measurements. The PE mixtures cure rapidly and display storage moduli that are orders of magnitude greater than equivalent copolymers cured in an aqueous medium. The versatility of these PE systems is demonstrated through the addition of a photoswitchable spiropyran acrylate monomer, as well as applying the PE formulation as a stereolithography (SLA)-based 3D printing resin. Due to the hydrogen-bonding network in PE systems, 3D printing of the eutectic resin is possible in the absence of crosslinkers. The addition of a RAFT agent to reduce average polymer chain length enables 3D printing of materials which retain their shape and can be dissolved on demand in appropriate solvents. This article is protected by copyright. All rights reserved.

Impact of the hot inner crust on compact stars at finite temperature

We conducted a study on the thermal properties of stellar matter with the nuclear energy density functional BCPM. This functional is based on microscopic Brueckner-Hartree-Fock calculations and has demonstrated success in describing cold neutron stars. To enhance its applicability in astrophysics, we extended the BCPM equation of state to finite temperature for beta -stable neutrino-free matter, taking into consideration the hot inner crust. Such an equation of state holds significant importance for hot compact objects, particularly those resulting from a binary neutron star merger event. Our exploration has shown that with increasing temperature, there is a fast decrease in the crust-core transition density, suggesting that for hot stars it is not realistic to assume a fixed value of this density. The microscopic calculations also reveal that the presence of nuclear clusters persists up to $T=7.21$\,MeV, identified as the limiting temperature of the crust. Above this threshold, the manifestation of clusters is not anticipated. Below this temperature, clusters within the inner crust are surrounded by uniform matter with varying densities, allowing for the distinction between the upper and lower transition density branches. Moreover, we computed mass--radius relations of neutron stars, assuming an isothermal profile for beta -stable neutron star matter at various temperature values. Our findings highlight the significant influence of the hot inner crust on the mass--radius relationship, leading to the formation of larger and more inflated neutron stars. Consequently, under our prescription, the final outcome is a unified equation of state at finite temperature.

Experimental study on the effect of filament-extrusion rate on the structural, mechanical and thermal properties of material extrusion 3D-printed polylactic acid (PLA) products

AbstractMaterial extrusion (MEX), also commonly referred to as fused deposition modeling (FDM) or fused filament fabrication (FFF) is currently one of the most commonly used additive manufacturing techniques. The quality of the 3D-printed objects fabricated by MEX methods highly relies on various printing parameters, one of which is the so-called filament extrusion multiplier (k). In this study, 3D-printed parts were prepared by MEX technique during which the material feeding rate was adjusted by varying the extrusion multiplier in the range of 97–105% (k = 0.97–1.05). The fabricated parts were tested for their geometrical, structural, mechanical, and thermal conductivity properties. Based on computed tomographic analysis and scanning electron microscopic images, increasing the k parameter resulted in smaller voids, along with gradually decreasing porosity (from 5.82 to 0.05%). Parallel to the decreasing defects, the thermal conductivity of the parts improved from 0.157 to 0.188 W/mK as determined by light-flash analysis technique. On the other hand, when k was set to ≥ 1.03 the geometrical accuracy declined, the size of the specimens considerably increased relative to the nominal values, especially in the X–Y directions due to excess material getting “squeezed” on the sides of the specimens. This latter phenomenon also resulted in the formation of a number of stress concentration sites, which manifested in the decrease of mechanical properties. Accordingly, the tensile, flexural, and impact strength of the samples improved up to k = 1.03; however, above that it dropped considerably.

Thermal behavior of Sicilian clay-based geopolymers

AbstractGeopolymers have been recently proposed for restoration of built heritage to substitute traditional mortars. Local materials and industrial wastes from the Italian region Sicily showed their potential as low-cost aluminosilicate sources for the preparation of geopolymers. Here, a set of Sicilian clays was studied by Thermogravimetry (TG) and Differential Scanning Calorimetry (DSC), and its mineralogical composition was evaluated by X-ray diffraction (XRD). The raw materials were used to prepare geopolymers by alkaline activation with or without the addition of silicate. The thermal degradation profile of the final materials was studied by TGA and compared with that of the precursors, and the energetics of dehydration were investigated by DSC. Two statistical analyses (made by Principal Component Analysis) were performed on the TG data of raw materials and geopolymers and on the TG data of geopolymers and their mineralogical composition, respectively. The last analysis in particular showed a correlation between the mineralogical composition of the materials and the samples' thermal properties. Additional studies of samples subject to accelerated aging by UV irradiation and exposure to acetic acid vapors highlighted the different effects of these two agents on the samples’ stability. Graphical abstract

Advanced Hierarchical Biomorphous Silicon Carbide Monoliths

Porous silicon carbide (SiC) has attracted considerable attention in the field of cellular ceramics for a variety of applications such as catalyst supports, filters, or in the biomedical field due to its excellent structural properties, mechanical strength, and chemical stability. However, SiC has certain limitations due to high‐temperature profiles and costly manufacturing methods. Therefore, it is investigated that porous biomorphic silicon carbide monoliths using a powder blend of paper‐derived carbon fibers, phenolic resin, and silicon, resulting in comparatively low sintering temperatures (T = 1300 to 1550 °C) and good mechanical strength. This near‐net‐shape process uses low‐cost raw materials and enables the production of silicon carbides with high open porosity (P = 51.48% to 68.28%) and low shrinkage. The influence of different amounts of carbon sources (Cfibers and Cresin) on the mechanical (4‐point bending) and thermal properties (laser flash method) is investigated. In addition, to improve the pressure gradients, macrochannels with multiple layers of sacrificial polymer lattices are incorporated, resulting in hierarchical structures with high permeability. Thus, this advanced biomimetic approach offers great potential for structured cellular ceramics with tailored properties for biomedical, catalyst support, or nuclear fuel cladding materials.

Non-intrusive thermal load disaggregation and forecasting for effective HVAC systems

Non-Intrusive Thermal Load Monitoring (NITLM) tracks the sub-loads generated by each heat source (e.g. occupants, equipment, solar radiation etc.) from the total thermal load and indirectly provides a room’s thermal properties without additional sensors. Since sub-loads can improve the efficiency of HVAC systems, NITLM is a very attractive technology for building energy management. NITLM has traditionally focused on analyzing past and present sub-loads. However, by forecasting future sub-loads, HVAC systems will be able to schedule operations that take into account the thermal properties of future rooms. This work focuses on a new NITLM framework that forecasts future sub-loads based on the current and past total thermal loads. In experiments, we selected occupant loads that are closely connected to HVAC systems and performed sub-load forecasting using two types of approaches. One is a two-step approach that separately performs them in turn. This approach use separately trained model for disaggregation and forecasting, this allow us to fine-tuning the hyper-parameter for dedicate model. Moreover, the two-step approach can take into account the different properties and difficulties of each inference, resulting in smaller errors in sub-load forecasting. The other is an integrated approach. This approach combines load disaggregation and forecasting into a single estimation process, eliminating error propagation and reducing overall error in sub-load forecasting. Moreover, this approach utilizes the Adaptive Moment Estimation (Adam) algorithm for effective parameter optimization, enabling complex training and improving the accuracy of sub-load forecasting. We conducted evaluations of thermal load disaggregation and forecasting across a range of realistic building scenarios. The findings indicate that the integrated approach predicts sub-loads with a MAE that is up to 34.9% lower than that of the two-step approach. Additionally, it identifies occupants presence with an 18.5% higher F-score. This demonstrates its enhanced suitability for accurately predicting sub-loads and estimating future occupancy schedules.

Preparation and characterization of novel bio‐based polyamide 5.6 composites as sustainable alternatives to petroleum‐derived polyamide 6.6

AbstractIn the pursuit of sustainable solutions, this study investigates the potential of bio‐based polyamide 5.6 (PA56) as a promising alternative to petroleum‐derived polyamide 6.6 (PA66). Novel composites of PA56 and PA66 were prepared with the incorporation of glass fibers and flame retardant additives by twin screw extruder. Subsequently, these composites were subjected to comprehensive characterization to determine their performance. The physical, mechanical, rheological, thermal, and flammability properties of PA56 composites were investigated and compared with those of PA66 composites with the same formulations. This article aims to unveil the remarkable potential of bio‐based PA56 composites in industrial applications. The results showed that bio‐based PA56 exhibits comparable, and in some cases superior, performance to PA66 while offering the added advantage of environmental sustainability. The findings suggest that bio‐based polyamide 5.6 can serve as a sustainable alternative to petroleum‐derived polyamide 6.6, contributing to a greener future in industrial applications.Highlights Bio‐based PA56 exhibits comparable properties to petroleum‐derived PA66. Incorporation of glass fibers and flame retardants enhances the properties of PA56. Findings propose PA56 as a sustainable alternative to PA66 in various applications.

Synthesis and properties of novel degradable polyglycolide-based polyurethanes

Graphical abstract Polyglycolide-based polyurethane was synthesized via chain extension reaction. As the hard segment content increases, its thermal stability and mechanical properties are improved; and the weight loss rate in PBS solution is reduced.

Symmetrical liquid crystalline dimers containing azo and azomethine linkages: synthesis, characterisation, mesomorphic study and DFT studies

ABSTRACT In the current study, one new series of symmetrical liquid crystalline homologous series of dimers with a rigid aromatic core with azo and azomethine group were synthesized using an ether-linking group. Several spectroscopic methods, including FT-IR, 1H-NMR, 13C-NMR and elemental analysis, were used to describe the synthesised dimers. The differential scanning calorimetry (DSC) and polarised optical microscopy (POM) were used to assess their mesomorphic properties. The results showed that the number of methylene spacers significantly affected the thermal properties of the synthesized dimers. To ascertain photophysical behaviour, UV-visible spectroscopy was employed. All the dimers of the present series show excellent enantiotropic nematic mesophase. The relationships between structure and its mesogenic property, the effects of various flexible spacers, the mesophase ranges, and the photo-isomerization of liquid crystalline dimers were all investigated. DFT study was carried out to gain a better understanding of structural features.

Fabrication of mechanical durable novolac matrix composites with recycled and cost-effective candle-soot nano particles

Novolac matrix composites are crucial due to their exceptional resistance to heat, chemicals, and mechanical stress. These advanced materials find applications in aerospace, electronics, and automotive industries, providing high-performance solutions for components requiring superior durability and reliability. In this context, the microstructure, thermal, phase, and mechanical properties of the composites obtained as a result of the recycling-oriented reinforcement of the waste candle-soot (CS) reinforcement at the rate of 1 wt% to the pure novolac (PN) and shaping with the hot press method were examined in detail at first time in the literature. While microstructural properties and fracture mechanisms were investigated by scanning electron microscopy (SEM), thermal properties were investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results obtained provided critical findings as the composite hardness, tensile strength, and flexural strength values were 3.28, 2.47, and 3.21 times higher than PN, respectively. CS-reinforced novolac composites made a significant contribution to the literature by introducing a novel and eco-friendly approach to enhance material properties. Their use as a filler material provided insights into sustainable novolac composites, offering potential applications in various industries, such as electronics and aerospace, with improved mechanical and thermal properties.

Insight into the Physical Properties of the Chalcogenide XZrS3 (X = Ca, Ba) Perovskites: A First-Principles Computation

AbstractThis study investigates the structural, mechanical, optical, thermal, and electronic properties of the ionic semiconducting materials XZrS3 (X = Ca, Ba) within the framework of density functional theory (DFT). Here, the elastic constants, modulus (bulk, shear, Young's), ratios (Pugh, Poisson) and elastic anisotropy for XZrS3 (X = Ca, Ba) are studied. Furthermore, the electronic, optical, and thermal properties for XZrS3 (X = Ca, Ba) are regenerated and designed using the values obtained with Cambridge Serial Total Energy Package (CASTEP) software. The calculated lattice parameters show excellent agreement with theoretical and experimental values. The elastic stiffness constants confirm the mechanical stability of both compounds. Although XZrS3 (X = Ca, Ba) is elastically anisotropic, it has little optical anisotropy. The electronic band structures of the material exhibit direct-bandgap semiconducting behavior, with values of 1.3 eV (CaZrS3) and 1.1 eV (BaZrS3) using the generalized gradient approximation (GGA), respectively, which is ideal for solar cell (0.9–1.56 eV) and optoelectronic device applications. Bandgap values of 1.9 eV and 1.6 eV are found for CaZrS3 and BaZrS3, respectively, using the Heyd–Scuseria–Ernzerhof HSE06 functional, which is consistent with previous theoretical and experimental bandgap results. The optical properties including dielectric function, refractive index, absorption coefficient, reflectivity, and loss function are characterized using the GGA of Perdew–Burke–Ernzerhof (GGA-PBE) and HSE06 methods and are discussed in detail. Because of the relatively low Debye temperature (D), thermal conductivity of the lattice (kph), and minimum thermal conductivity (Kmin), the studied materials can be used as thermal barrier coating (TBC) materials. The capacity of heat, Debye temperature, and thermal coefficient of expansion are all computed.

Synthesis of N‐Acyl Indole‐3‐Carboxaldehyde Derivatives and Polyvinyl Alcohol Acetalization with 1‐Propionylindole‐3‐Carboxaldehyde

AbstractA series of seven stable amide derivatives based on indole‐3‐carboxaldehyde were synthesized with high yields using various aliphatic and aromatic acyl chlorides, triethylamine and DMAP as the catalyst at room temperature. Structural characterization was performed using FT‐IR, 1 H‐NMR, 13C‐NMR and LC–MS techniques. To develop bioactive material, acetalization of water‐soluble polyvinyl alcohol was achieved by reacting one of the N‐acyl derivatives, 1‐propionylindole‐3‐carboxaldehyde, in the presence of a p‐TSA catalyst to form polyvinyl acetal with pendant bioactive groups. The polymer was analyzed using 1 H‐NMR, FT‐IR, TGA, DSC, FE‐SEM and EDX spectroscopic techniques. The polymer was water‐insoluble with enhanced thermal stability compared to pure polyvinyl alcohol. This approach for developing N‐acyl derivatives of indole‐3‐carboxaldehyde and then reacting one of the monomers with polyvinyl alcohol to improve its thermal properties and stability in humid conditions has proven successful.

Effect of sodium hydroxide treatment on the fracture toughness of luffa natural fiber reinforced epoxy epikote 828

AbstractMicro‐sized luffa natural fibers (MLNFs) were derived from raw luffa natural fibers from Vietnam by undergoing treatment with sodium hydroxide. This study examined the impact of sodium hydroxide concentration, temperature, and treatment duration on the fracture toughness of epoxy resin 828 reinforced with MLNFs. The results showed that the fracture toughness of the composite, as measured by the critical‐stress‐intensity factor (KIC) and Izod impact strength, was improved after the treatment of the MLNFs with sodium hydroxide. Specifically, with the optimal sodium hydroxide treatment parameters of 6% NaOH at 70 °C for 6 h, the critical‐stress‐intensity factor increased by 93% (from 2.0 to 3.86 MPa m1/2) and the Izod impact strength rose by 44.6% (from 3.81 to 5.51 kJ/m2). The thermal properties and surface structure of MLNFs treated with NaOH were analyzed using thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) images.

Materials and Methods for All-Cellulose 3D Printing in Sustainable Additive Manufacturing

Additive manufacturing, commonly referred to as 3D printing, is an exciting and versatile manufacturing technology that has gained traction and interest in both academic and industrial settings. Polymeric materials are essential components in a majority of the feedstocks used across the various 3D printing technologies. As the environmental ramifications of sole or primary reliance on petrochemicals as a resource for industrial polymers continue to manifest themselves on a global scale, a transition to more sustainable bioderived alternatives could offer solutions. In particular, cellulose is promising due to its global abundance, biodegradability, excellent thermal and mechanical properties, and ability to be chemically modified to suit various applications. Traditionally, native cellulose was incorporated in additive manufacturing applications only as a substrate, filler, or reinforcement for other materials because it does not melt or easily dissolve. Now, the exploration of all-cellulose 3D printed materials is invigorated by new liquid processing strategies involving liquid-like slurries, nanocolloids, and advances in direct cellulose solvents that highlight the versatility and desirable properties of this abundant biorenewable photosynthetic feedstock. This review discusses the progress of all-cellulose 3D printing approaches and the associated challenges, with the purpose of promoting future research and development of this important technology for a more sustainable industrial future.

Glucose-stabilized polyvinyl acetate homopolymer-based wood adhesive: synthesis and characterization

The purpose of this work was to study the synthesis and characterization of an adhesive based on a glucose stabilized polyvinyl acetate homopolymer. Vinyl acetate monomer was stabilised onto liquid glucose using emulsion polymerization, and polymerization happened using potassium persulfate as an initiator. Here, the effects of adding liquid glucose as a stabiliser for adhesives were studied. Therefore, the current research examines whether liquid glucose, introduced at weight-based concentrations of 0.5% and 1.0%, is suitable as a colloid to produce PVAc adhesives for wood. By measuring viscosity, pH, contact angle, differential scanning calorimetry (DSC), and the pencil hardness test of films, the effect of adding liquid glucose as a colloid on physical, thermal, and mechanical properties was investigated. The shear strength of the PVAc homopolymers applied to wood using emulsions with varied liquid glucose concentrations was measured using a universal tensile machine. As the concentration of liquid glucose increased, the viscosity of the adhesives also considerably increased. Water resistance significantly rose when liquid glucose content increased, as was found by measuring the water contact angle. The use of liquid glucose increased the hardness of PVAc films, which was supported by the glass transition temperature. According to EN 204-205, the tensile shear strength with 1.0% of liquid glucose increased by 63.88% and 45.67%, respectively, over a pristine sample after 6 h of bonding in a dry environment and 24 h in a wet environment. The study’s overall conclusion highlights the higher adhesion capability of PVAc emulsion-based adhesives stabilized by liquid glucose.

Scleroglucan-Based Foam Incorporating Recycled Rigid Polyurethane Waste for Novel Insulation Material Production

This study details the synthesis and performance evaluation of a novel lightweight thermal and acoustic insulation material, resulting from the combination of a scleroglucan-based hydrogel and recycled rigid polyurethane waste powder. Through a sublimation-driven water-removal process, a porous three-dimensional network structure is formed, showcasing notable thermal and acoustic insulation properties. Experimental data are presented to highlight the material’s performance, including comparisons with commercially available mineral wool and polymeric foams. This material versatility is demonstrated through tunable mechanical, thermal and acoustic characteristics, achieved by strategically adjusting the concentration of the biopolymer and additives. This adaptability positions the material as a promising candidate for different insulation applications. Addressing environmental concerns related to rigid polyurethane waste disposal, the study contributes to the circular economy.

Thermal and Electrical Properties of High-Temperature Proton-Conducting Cellulose Nanofibers Swollen with Protic Ionic Liquid

Thermal and Electrical Properties of High-Temperature Proton-Conducting Cellulose Nanofibers Swollen with Protic Ionic Liquid

In vitro analysis of electrospun nanofibrous polycaprolactone loaded with Rhamnus prinoides leaf extract as potential wound dressing

AbstractRhamnus prinoides, an indigenous Ethiopian traditional medicinal plant, has been used for treating various ailments including skin conditions in traditional formulations. In this study, plant leaf extract has been incorporated into polycaprolactone (PCL) nanofibers through electrospinning at concentrations of 1%, 3%, 5%, 7% wt/vol for the first time. The presence of extract in the nanofiber was analyzed using Fourier transform infrared. The in vitro antibacterial activity, release, contact angle, thermal, and mechanical properties of the nano mats were characterized. The scanning electron microscopy (SEM) analysis revealed that the produced mats are continuous, smooth, bead‐less, and inter connected. The examination of SEM images using ImageJ revealed that the fiber diameter ranged from 219 ± 47 nm to 284 ± 114 nm. The mats showed excellent anti‐bactericidal activity against both Staphylococcus aureus and Escherichia coli. During the 72‐h in vitro release investigation, an initial burst release was observed within the first 12 h, followed by sustained release of the extract over long period of time. The contact angle analysis showed, addition of leaf extract to the PCL nanofiber increased hydrophilicity. Furthermore, the nanofiber membranes had favorable mechanical properties. Overall, these findings suggested that R. prinoides leaf extract‐functionalized PCL nanofibers could be effective wound dressings with broad‐spectrum antimicrobial activity.

CdSe/polyvinyl alcohol nanocomposite films for packaging: thermal, mechanical, optical and physico-chemical properties

CdSe/polyvinyl alcohol nanocomposite films for packaging: thermal, mechanical, optical and physico-chemical properties